DSpace
 

University of Fukui Repository (UFR) >
300 大学院工学研究科・工学部 >
310 研究紀要(研究報告) >
02 福井大学工学部研究報告 >

Please use this identifier to cite or link to this item: http://hdl.handle.net/10098/5096

タイトル: 固体潤滑剤による高温度玉軸受の混合気潤滑
著者: 豊島, 敏雄
TESHIMA, Toshio
Issue Date: Mar-1962
抄録: The need is beboming more and more urgent for bearings operating at very high temperatures. But present-day liquid lubricants are temperature-limited owing to their characteristics,but solid lubricants are chemically more stable. So in pursuit of information concerning the performances of the angular contact type ball bearing operating in an electric furnace under the solid lubricant mist lubrication at high temperature,the frictional moment and temperature of bearing have been measured. The conclusion reached on the experimental results is as follows. The bearing can be run at surrounding temperatures up to 800℃ without appreciable damage. The smaller the particles of solid lubricants, the less frictional moments are obtained, but at very high temperatures the grading and consumption of solid lubricants have little influence on the frictional moment. Small change in frictional moment occurs in accordance with variation of surrounding temperature, but at high surrounding temperatures frictional moment is largely affected from bearing load. The moisture content of solid lubricants have little influence on the frictional moment. The cooling effect of air is somewhat remarkable.
URI: http://hdl.handle.net/10098/5096
ISSN: 04298373
Appears in Collections:02 福井大学工学部研究報告
03 大学院工学研究科・工学部

Files in This Item:

File Description SizeFormat
AN00215401-10-0102-021.pdf4.55 MBAdobe PDFView/Open

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback